上海宽捷光电科技有限公司    Pranalytica    Pranalytica High Power Laser System Model 1101-46-CW-XXXX
large_laser_head

Pranalytica High Power Laser System Model 1101-46-CW-XXXX

Pranalytica High Power Laser System Model 1101-46-CW-XXXX

Pranalytica High Power Laser System Model 1101-46-CW-XXXX

The Model 1101-46-CW-XXXX laser is sold as a complete system consisting of the laser head and matched power supply, ready to be turned on at the customer's location. The thermoelectric cooler and collimating optics for the quantum cascade laser are located in a hermetically sealed package for trouble free operation in real environments.

The system is offered in four power output versions:

Model 1101-46-CW-750: Power output of > 0.75 W, continuous wave in an ambient environment with laser head at room temperature

Model 1101-46-CW-1000: Power output of > 1.0 W, continuous wave in an ambient environment with laser head at room temperature

Model 1101-46-CW-1500: Power output of > 1.5 W, continuous wave in an ambient environment with laser head at room temperature

Model 1101-46-CW-2000: Power output of > 2.0 W, continuous wave in an ambient environment with laser head at room temperature

 

Packaged quantum cascade laser (laser head)

Operation CW operation with the laser head at room temperature
Wavelength 4.6 µm
Output spectrum Broadband power centered ~4.6 µm; spectral width ~ 150 nm
Power output ≥0.75 W, ≥1.0 W, 1.5 W, or >2.0 W (model dependent)
Output beam Nearly collimated
Output beam quality Nearly diffraction limited (please call for details)
CW operation Model 1101-46-CW may be operated in true CW mode by applying +5V DC to the modulation input connector (front panel)
Modulated operation Model 1101-46-CW may be modulated from 1 kHz to 100 kHz by applying TTL modulation to the input connector (front panel)
Reliability Measured lifetime data for >3,000 hours with no power degradation at full power and periodic thermal cycling from full power to off and vice versa
Physical details Size: 13 cm (W), 17 cm (H), 15 cm (D)
  Weight: 1.9 kg


 

Power supply

Laser Provides the necessary laser drive current for the quantum cascade laser (factory adjusted to deliver the specified laser output power)
Thermoelectric coolers Provides the necessary drive current for the associated thermoelectric coolers (factory adjusted to provide the needed cooling at the optimum operating point)
Modulation Front panel input connector for modulation of the laser output from 1 kHz to 100 kHz (3 dB bandwidth, TTL input), limited by the power supply. The quantum cascade laser can be modulated at rates up to 1 GHz with special power supply.
Protection Laser power supply is equipped with multiple levels of protection for trouble free operation of the QCL
  Power supply has a 5 second startup delay time
  Laser is activated by a separate switch
Physical details Size: 28 cm (W), 18 cm (H), 37 cm (D)
  Weight: 10 kg
Electrical details 110/220 V, 4 A (max)
  Optional modification available for operation from a single 28V DC source with somewhat lower power consumption

Product